LIGHTWARE VINX-120-HDMI-ENC: IP based encoder via a Gigabit Ethernet network. 4K / UHD (30Hz RGB 4:4:4 , 60Hz YCbCr 4:2:0) are supported. Advanced EDID Management. USB HID and 2.0 mass storage data support, HDCP2.2 compliant, RS-232 and IR support.
Description
AV Over IP Scaling Multimedia Extender with USB KVM, RS-232 and IR
Our AV-Over-IP system for Gigabit Ethernet networks, the VINX series devices are popular products, which can also run in point-to-point configuration and have diverse application possibilities, especially recommended for applications where scalability, fl
Highlighted features
- Video Wall Processing
- Extension distance up to 100 meters with CAT5e or CAT6
- USB KVM (HID) extension
- Built-in website for device configuration
EXTENDER * VIRTUAL MATRIX * VIDEO WALL PROCESSOR * KVM EXTENDER
The operation of VINX-120- HDMI-ENC and VINX-110-HDMI-DEC can be expanded from a simple point-to-point application to unlimited endpoints for the ultimate in virtual matrix switching, digital signage and signal extension. The extenders include our Advanced EDID Management system and decoders are capable of scaling the video signal up to the maximum supported resolution of 4K UHD @ 30 Hz. RS-232 and IR control channels are supported. The built-in USB ports support KVM function and can also handle USB 2.0 mass storage. The units are HDCP compliant.
One of the most popular of the unique features of VINX is the Video Wall setup, reducing the time needed to install a video wall to a fraction of the time needed with other systems. The feature options include gap and bezel adjustment, which can be performed in batch.
SILENT OPERATION
The efficient design of all VINX models allows passive, fanless cooling. Unlike other third party models in this product category, VINX have noiseless operation, fitting even the most silent application environments.
BUILT-IN CROSSPOINT VIEW
VINX series also features crosspoint view: available in both the free Lightware Device Controller (LDC) management software and the built-in web in the devices, the crosspoint view shows the available input and output ports of all connected encoder and decoder units, and allows switching the signals across them. The signal can also be switched to a video wall output assembled from several VINX units and acting as a single display sink. A special keyboard combination can be linked with various sources to switch signals.
SMART BANDWIDTH MANAGEMENT
The built-in, selectable Video and Graphic Modes optimize streaming and compression to match the transferred media. The Variable Bitrate feature provides an even more accurate adjustment option for smart bandwidth management, adjustable between 10 Mbps and 800 Mbps.
POWER TRAY FOR CONVENIENT MOUNTING
We have developed a 3 RU sized PRC-16 Powered Rackmount Cage for VINX-120- HDMI-ENC and VINX-110-HDMI-DEC, which allows convenient mounting for up to 16 devices in any combination, also providing power to the mounted units.
Key Features
- Video Wall Processing
- Adjustable video stream bitrate
- Extension distance up to 100 meters with CAT5e or CAT6
- Compact and silent design
- USB KVM (HID) extension
- Command injection on RS-232 and IR ports
- 1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
- Advanced EDID Management
- Intuitive control software for device configuration
- Device control via Ethernet (TCP/IP)
- Built-in website for device configuration
- Bi-directional RS-232 extension (pass-through)
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Firmware upgrade through Ethernet
- HDCP 2.2 and HDCP 1.4 compliant
- Local monitor output on transmitter
- Status LED for video signal detection
- Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
- External universal power adaptor
- Mounting options for rack, furniture or truss
Specifications
- Brand
- Lightware
- Product
- VINX-120-HDMI-ENC
- Product Category
- AV over IP Extenders
- 3D
- Y
- AV over IP Protocol
- LIGHTWARE
- Additional Connectors
- IRRS232USB
- Extender/Repeater Type
- EncoderSenders
- External power adapter
- Yes
- Form factor
- Compact/Desktop
- HDCP
- Yes
- HDMI in
- 1
- HDMI version
- 1.4
- Depth (mm)
- 140
- Height (mm)
- 26
- Width (mm)
- 119
- Material
- Metal
- Maximum Range
- Up to 100m
- Maximum resolution (pixels)
- 3840 x 2160
- Number of HDMI outputs
- 1
- Operating relative humidity (H-H) (%)
- 0 - 90
- Operating temperature (T-T) (°C)
- 0 - 40
- Over-Cable Type
- Cat-5e or Better
- Product colour
- Black
- Signal Type
- HDMI 1.xUSB KVM
- Storage temperature (T-T) (°C)
- -20 - 60
- Supported video modes
- 1080i1080p2160p480p576p
- Weight (g)
- 310
- DC-in jack
- Yes
LIGHTWARE VINX-120-HDMI-ENC: IP based encoder via a Gigabit Ethernet network. 4K / UHD (30Hz RGB 4:4:4 , 60Hz YCbCr 4:2:0) are supported. Advanced EDID Management. USB HID and 2.0 mass storage data support, HDCP2.2 compliant, RS-232 and IR support.
Description
AV Over IP Scaling Multimedia Extender with USB KVM, RS-232 and IR
Our AV-Over-IP system for Gigabit Ethernet networks, the VINX series devices are popular products, which can also run in point-to-point configuration and have diverse application possibilities, especially recommended for applications where scalability, fl
Highlighted features
- Video Wall Processing
- Extension distance up to 100 meters with CAT5e or CAT6
- USB KVM (HID) extension
- Built-in website for device configuration
EXTENDER * VIRTUAL MATRIX * VIDEO WALL PROCESSOR * KVM EXTENDER
The operation of VINX-120- HDMI-ENC and VINX-110-HDMI-DEC can be expanded from a simple point-to-point application to unlimited endpoints for the ultimate in virtual matrix switching, digital signage and signal extension. The extenders include our Advanced EDID Management system and decoders are capable of scaling the video signal up to the maximum supported resolution of 4K UHD @ 30 Hz. RS-232 and IR control channels are supported. The built-in USB ports support KVM function and can also handle USB 2.0 mass storage. The units are HDCP compliant.
One of the most popular of the unique features of VINX is the Video Wall setup, reducing the time needed to install a video wall to a fraction of the time needed with other systems. The feature options include gap and bezel adjustment, which can be performed in batch.
SILENT OPERATION
The efficient design of all VINX models allows passive, fanless cooling. Unlike other third party models in this product category, VINX have noiseless operation, fitting even the most silent application environments.
BUILT-IN CROSSPOINT VIEW
VINX series also features crosspoint view: available in both the free Lightware Device Controller (LDC) management software and the built-in web in the devices, the crosspoint view shows the available input and output ports of all connected encoder and decoder units, and allows switching the signals across them. The signal can also be switched to a video wall output assembled from several VINX units and acting as a single display sink. A special keyboard combination can be linked with various sources to switch signals.
SMART BANDWIDTH MANAGEMENT
The built-in, selectable Video and Graphic Modes optimize streaming and compression to match the transferred media. The Variable Bitrate feature provides an even more accurate adjustment option for smart bandwidth management, adjustable between 10 Mbps and 800 Mbps.
POWER TRAY FOR CONVENIENT MOUNTING
We have developed a 3 RU sized PRC-16 Powered Rackmount Cage for VINX-120- HDMI-ENC and VINX-110-HDMI-DEC, which allows convenient mounting for up to 16 devices in any combination, also providing power to the mounted units.
Key Features
- Video Wall Processing
- Adjustable video stream bitrate
- Extension distance up to 100 meters with CAT5e or CAT6
- Compact and silent design
- USB KVM (HID) extension
- Command injection on RS-232 and IR ports
- 1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
- Advanced EDID Management
- Intuitive control software for device configuration
- Device control via Ethernet (TCP/IP)
- Built-in website for device configuration
- Bi-directional RS-232 extension (pass-through)
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Firmware upgrade through Ethernet
- HDCP 2.2 and HDCP 1.4 compliant
- Local monitor output on transmitter
- Status LED for video signal detection
- Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
- External universal power adaptor
- Mounting options for rack, furniture or truss
Specifications
- Brand
- Lightware
- Product
- VINX-120-HDMI-ENC
- Product Category
- AV over IP Extenders
- 3D
- Y
- AV over IP Protocol
- LIGHTWARE
- Additional Connectors
- IRRS232USB
- Extender/Repeater Type
- EncoderSenders
- External power adapter
- Yes
- Form factor
- Compact/Desktop
- HDCP
- Yes
- HDMI in
- 1
- HDMI version
- 1.4
- Depth (mm)
- 140
- Height (mm)
- 26
- Width (mm)
- 119
- Material
- Metal
- Maximum Range
- Up to 100m
- Maximum resolution (pixels)
- 3840 x 2160
- Number of HDMI outputs
- 1
- Operating relative humidity (H-H) (%)
- 0 - 90
- Operating temperature (T-T) (°C)
- 0 - 40
- Over-Cable Type
- Cat-5e or Better
- Product colour
- Black
- Signal Type
- HDMI 1.xUSB KVM
- Storage temperature (T-T) (°C)
- -20 - 60
- Supported video modes
- 1080i1080p2160p480p576p
- Weight (g)
- 310
- DC-in jack
- Yes